After installing the Eclipse SDK in a directory, you can start the Workbench
by running the Eclipse executable included with the release (you also need a 1.4.2
JRE, not included with the Eclipse SDK). On Windows, the executable file is called eclipse.exe,
and is located in the
eclipse sub-directory of the install. If
c:\eclipse-SDK-3.4-win32, the executable is
Note: Set-up on most other operating environments is analogous. Special
instructions for Mac OS X are listed below.
By default, Eclipse will allocate up to 256 megabytes of Java heap memory. This should
be ample for all typical development tasks. However, depending on the JRE
that you are running, the number of additional plug-ins you are using, and
the number of files you will be working with, you could conceivably have to increase this amount.
Eclipse allows you to pass arguments directly to the Java VM using the
-vmargs command line argument, which must follow all other Eclipse specific arguments.
Thus, to increase the available heap memory, you would typically use:
eclipse -vmargs -Xmx<memory size>
<memory size> value set to greater than
"256M" (256 megabytes -- the default).
When using a Sun VM, you may also need to increase the size of the permanent generation memory. The default maximum is 64 megabytes, but more may be needed depending on your plug-in configuration and use. When the VM runs out of permanent generation memory, it may crash or hang during class loading. This failure is less common when using Sun JRE version 1.5.0_07 or greater. The maximum permanent generation size is increased using the -XX:MaxPermSize=<memory size> argument:
eclipse -vmargs -XX:MaxPermSize=<memory size>
This argument may not be available for all VM versions and platforms; consult your VM documentation for more details.
Note that setting memory sizes to be larger than the amount of available physical memory on your machine will cause Java to "thrash" as it copies objects back and forth to virtual memory, which will severely degrade your performance.
When the Workbench is launched, the first thing you see is a
dialog that allows you to select where the workspace will be located. The
workspace is the directory where your work will be stored.
If you do not specify otherwise, Eclipse creates the workspace in your
This workspace directory is used as the default content area for your projects
as well as for holding any required metadata. For shared or multi-workspace
installs you must explicitly specify the location for your workspace using the
dialog (or via the "
-data" command line argument).
Here is a typical Eclipse command line:
eclipse -vm c:\jdk1.4.2\jre\bin\javaw
Tip: It's generally a good idea to explicitly specify which Java VM to
use when running Eclipse. This is achieved with the "
command line argument as illustrated above. If you don't use "
Eclipse will look on the O/S path. When you install other Java-based products,
they may change your path and could result in a different Java VM being used
when you next launch Eclipse.
To create a Windows shortcut to an installed Eclipse:
eclipse.exein Windows Explorer and use Create Shortcut on the content menu.
Opening this shortcut launches Eclipse. (You can drag the shortcut to the Windows Desktop if you want to keep it in easy reach.)
On Mac OS X, you start Eclipse by double clicking the Eclipse application. If you need to
pass arguments to Eclipse, you'll have to edit the
inside the Eclipse application bundle: select the Eclipse application bundle icon while holding down the Control Key.
This will present you with a popup menu. Select "Show Package Contents" in the popup menu.
eclipse.ini file in the
Contents/MacOS sub-folder and open it with your favorite text editor to edit the command line options.
On MacOS X you can only launch a UI program more than once if you have separate copies of the program on disk. The reason for this behavior is that every UI application on Mac can open multiple documents, so typically there is no need to open a program twice. Since Eclipse cannot open more than one workspace, this means you have to make a copy of the Eclipse install if you want to open more then one workspace at the same time (bug 139319).
If you need to launch Eclipse from the command line, you can use the symbolic link "eclipse" in the top-level eclipse folder. It refers to the eclipse executable inside the application bundle and takes the same arguments as "eclipse.exe" on other platforms.
On Mac OS X 10.4 and later, you may notice a slow down when working with significant numbers of resources if you allow Spotlight to index your workspace. To prevent this, start System Preferences, select the Spotlight icon, then the Privacy tab, then click the Add button ("+") and find your workspace directory in the dialog that appears.
The startup speed of a shared install can be improved if proper cache information is stored in the shared install area. To achieve this, after unzipping Eclipse distribution, run Eclipse once with the "-initialize" option from an account that has a write access to the install directory.
The Eclipse executable and the platform itself offer a number of execution options of interest to people developing or debugging parts of Eclipse. This is a list of the commonly used options, for a full list see the Eclipse runtime options page in the Platform Plug-in Developer Guide. The general form of running the Eclipse executable is:
eclipse [platform options] [-vmargs [Java VM arguments]]
|Defines the processor architecture on which the Eclipse
platform is running. The Eclipse platform ordinarily computes the optimal
setting using the prevailing value of Java
|The application to run. Applications are declared by plug-ins supplying extensions to the org.eclipse.core.runtime.applications extension point. This argument is typically not needed. If specified, the value overrides the value supplied by the configuration. If not specified, the Eclipse Workbench is run.||1.0|
|Cleans cached data used by the OSGi framework and Eclipse runtime. Try to run Eclipse once with this option if you observe startup errors after install, update, or using a shared configuration.||3.0|
|The location for the Eclipse Platform configuration file, expressed as a URL. The configuration file determines the location of the Eclipse platform, the set of available plug-ins, and the primary feature. Note that relative URLs are not allowed. The configuration file is written to this location when the Eclipse platform is installed or updated.||2.0|
|Mirrors the Eclipse platform's error log to the console
used to run Eclipse. Handy when combined with
|The path of the workspace on which to run the Eclipse platform. The workspace location is also the default location for projects. Relative paths are interpreted relative to the directory that Eclipse was started from.||1.0|
|Puts the platform in debug mode and loads the debug options from the file at the given location, if specified. This file indicates which debug points are available for a plug-in and whether or not they are enabled. If a file location is not given, the platform looks in the directory that eclipse was started from for a file called ".options". Both URLs and file system paths are allowed as file locations.||1.0|
|Puts the platform in development mode. The optional classpath
entries (a comma separated list) are added to the runtime classpath of
each plug-in. For example, when the workspace contains plug-ins being
|Initializes the configuration being run. All runtime related data structures and caches are refreshed. Handy with shared installs: running Eclipse once with this option from an account with write privileges will improve startup performance.||3.0|
| The location of the authorization database (or "key
ring" file) on disk. This argument must be used in conjunction with
|Defines the name of the locale on which the Eclipse platform is running. The Eclipse platform ordinarily computes the optimal setting automatically. If specified here, this is the value that the Eclipse platform uses. The value specified here is available to plug-ins as BootLoader.getNL(). Example values: "en_US" and "fr_FR_EURO".||2.0|
|Runs the platform without putting up the splash screen.||1.0|
|Defines the operating system on which the Eclipse platform
is running. The Eclipse platform ordinarily computes the optimal setting
using the prevailing value of Java
|The password for the authorization database. Used in conjunction
|The perspective to open in the active workbench window on startup. If this parameter is not specified, the perspective that was active on shutdown will be opened.||1.0|
|The location of a properties file containing default settings for plug-in preferences. These default settings override default settings specified in the primary feature. Relative paths are interpreted relative to the directory that eclipse was started from.||2.0|
|The ID of the product to run. The product gives the launched instance of Eclipse its personality, and determines the product customization information used. This replaces -feature, which is still supported for compatibility.||3.0|
|Option for performing a global refresh of the workspace on startup. This will reconcile any changes that were made in the file system since the platform was last run.||1.0|
|Option for displaying the location of the workspace in the window title bar. In release 2.0 this option only worked in conjunction with the -data command line argument. In 3.2, an optional workspace name argument was added that displays the provided name in the window title bar instead of the location of the workspace.||2.0|
|The location of Java Runtime Environment (JRE) to use to
run the Eclipse platform. If not specified, the launcher will attempt to find
a JRE. It will first look for a directory called
|When passed to the Eclipse, this option is used to customize the operation of the Java VM used to run Eclipse. If specified, this option must come at the end of the command line. The given arguments are dependant on VM that is being run.||1.0|
All arguments following (but not including) the -vmargs entry are passed directly through to the indicated Java VM as virtual machine arguments (that is, before the class to run). Note: If an Eclipse startup argument, such as -data, is provided after the Java vm arguments (-vmargs), Eclipse will not start and you will receive a "JVM terminated. Exit code=1" error.